Maintenance and Care Strategies for Your Smok Pen Starter Kit
The Smok Pen is a new type of pen which allows you to write on paper that is heated before you write. It’s the kind of device that some students would want to have, as it eliminates the necessity for them to carry a complete tube of special writing ink. You simply fill the reservoir with the normal ink and place your pen in the unit and write on any smooth surface you want.
The Smok pen includes two major components: the pen body, which is of course where you hold it set up, and the Smok Valve which serve as the connector for the USB charging port. Both parts are encased in a metal and plastic tube referred to as the Smok Valve, that is opened via a valve control found at the bottom of the pen. One end of this tube results in the cigarette lighter socket as the other leads to the USB charging port. On the front side of the Smok Valve you will find a dome with a lip that holds the heating element.
Once the pen is charged, it is heated up by the USB power port and begins to create heat. This heat melts the glue which holds the Smok Valve together, causing it to expand until it leaks out onto the paper or whatever you are writing on. After the ink is successfully charged, the Smok Valve automatically closes, leaving you with a fully functional pen. The surface of the pen includes a transparent dome with a lip around it. Both edges of the dome have a metallic texture in their mind, which when heated causes the ink to spread into a fine powder that can easily be sucked into the writing medium.
When you initially remove your Smok Pen, you will observe that it looks exactly like any other pen. It includes a fine point that wont smudge or bleed if you are writing on paper. It also has a beautiful metallic shine to it, gives these devices a futuristic look. However, this will not mean that the device cannot be used in a typical manner, as there are a variety of different ways in which you can still benefit from the great features of the pen.
A proven way is to heat the machine using your hand, which is how a lot of people enjoy their pens. If you are using the device in this manner, you need to ensure that you do not touch the heating coil heads directly. Instead, you should warm the entire pen to bring out their warmth. It is very important remove the battery ahead of this step, as some manufacturers specify a certain temperature to activate the coil heads. There are many different e-liquids available on the market that can help you accomplish that heat change efficiently, ensuring that you never come across issues while warming the pen.
You may find that after heating up the device that it generally does not work correctly. This normally implies that you are either holding the pen incorrectly, are pressing the heating coil too much, or are holding the device at a position that is not conducive to warming. If this is actually the case, then you will need to take away the batteries and put these devices back together again. It is recommended that you do this each and every time you start enjoying your Smok Pen starter kit – if you wish to keep carefully the device for longer than this Puff Bar then you can simply repeat the process until you have everything sorted.
When testing your starter kit to ensure that everything is working correctly, you will have to take a look at the connections to the tank and the coil head. Ideally, the connections on the tank should be securely tightened – if they’re loose then they ought to be tightened to the manufacturer’s specifications. If you feel that this is not done correctly, then it may be worthwhile having the entire tank re-tightened by a professional as much devices like they are manufactured to a very high standard. If this isn’t the case, then the only way to make sure that everything is working properly would be to have the entire tank re-tied.
The next phase in the battery care process would be to charge your show pen. This may usually be done through the USB port of your computer. Once charged, these devices should be ready for use. After you have completed this step, you need to leave the device plugged into a power supply. You need to check regularly that all the coils are charged up, and then you should leave these devices to charge for the recommended time period – typically around 5 hours.